Boss SY-1000 Reference Manual Download Page 94

Page: 94 / 99

Saving a Sound (WRITE)

Initializing Patches (PATCH INITIALIZE)

You can return (initialize) a User patch to its original factory settings.

This is convenient when you want to create a new patch from scratch.

CAUTION

Any tone settings you’ve stored in a patch are lost once the

initialization is executed.

Press the [WRITE] button.

Press the [3] knob to select “INITIALIZE” (PATCH

INITIALIZE).

Use the [1] knob to select the user patch that you

want to initialize. Use the [2] knob to select the type

of patch.

* If you decide to cancel without initializing, press the [EXIT] button

a several times. You’ll be returned to the Play screen.

* The patch type can also be switched even after initialization. For

details, refer to the EFFECTS section’s explanation of INPUT block

“PATCH TYPE” (p. 66).

Press the [WRITE] button once again.

A confirmation message appears.

Press the [6] knob.

The patch will be initialized. If you decide to cancel the initialize

operation, press the [5] knob.

Inserting a Patch (PATCH INSERT)

You can insert a patch into any position of the user patches.
For example, if you insert patch U01-1 at U02-1, patch U02-1 and

subsequent patches are shifted (renumbered) backward by one.

(Patch U02-1 becomes U02-2.)

CAUTION

When you execute the insert operation, the last user patch (U50-4) is

deleted.

Press the [WRITE] button.

Press the [4] knob to select “INSERT” (PATCH

INSERT).

Use the [1] knob to select the insert-destination

user patch.

* If you decide to cancel without inserting, press the [EXIT] button a

several times. You’ll be returned to the Play screen.

Press the [WRITE] button once again.

A confirmation message appears.

Press the [6] knob.

The patch is inserted at the specified position. If you decide to

cancel the insert operation, press the [5] knob.

Summary of Contents for SY-1000




































































































Search results

Summary of Contents for SY-1000

Reviews:

Related manuals for SY-1000

Brands by name

Popular brands

Boss SY-1000, Reference Manual

Search results

Summary of Contents for SY-1000

Reviews:

Related manuals for SY-1000

Brands by name

Popular brands