78
CONTROL ASSIGN Parameters > PATCH MIDI
About the Range of a Controller’s Change
This sets the operational range within which the value of the
setting changes when an expression pedal or other controller
that changes the value consecutively is used as the source. If
the controller is moved outside the operational range, the value
does not change, it stops at “minimum” or “maximum.”
(Example) With ACT LOW: 40, ACT HIGH: 80
When the
pedal is
fully raised
ACT
LOW
ACT
HIGH
When the
pedal is fully
advanced
0
127
A
llo
w
able
Par
amet
er
Settings R
ange
40
80
MAX
MIN
Degree to Which
Expression Pedal
Is Depressed
When the
pedal is
fully raised ACT
LOW
ACT
HIGH
When the
pedal is fully
advanced
40
80
60
Value
ON
OFF
Degree to Which
Expression Pedal
Is Depressed
0
127
Center
Value
* When using a footswitch or other on/off switching controller
as the source, leave these at “ACT LOW: 0” and “ACT HIGH:
127.” With certain settings, the value may not change.
PATCH MIDI
When you change patches, a program number and bank select
messages are transmitted to an external MIDI device.
* If the “MIDI SETTING” parameter “TX PC MAP” is set to FIX, the
PATCH MIDI function will not operate. Set the parameter to “PATCH
MIDI.”
PATCH MIDI 1–PATCH MIDI 4
Parameter
Value
Explanation
CHANNEL
(CH)
OFF, 1–16
Specifies the transmit channel for
MIDI messages.
If this is OFF, no MIDI message is
transmitted.
PC#
OFF, 1–128
Specifies whether a program
number is transmitted when you
switch patches.
If this is OFF, no program number is
transmitted.
BANK MSB
BANK LSB
OFF, 1–127
Specifies whether bank select
messages are transmitted when you
switch patches.
* It is not possible to transmit only
BANK LSB.
* Not transmitted if PC# is OFF.
* It is not possible to transmit only
bank select. Bank select is always
transmitted in conjunction with
program numbers.
CC1#
CC2#
OFF, 1–127
Specifies whether a control change
is transmitted when you switch
patches.
If this is OFF, no control change is
transmitted.
CC1 VALUE
CC2 VALUE
0–127
Specifies the value of the control
change.