84
SYSTEM Parameters > IN/OUT SETTING
Parameter
Value
Explanation
L:MAIN OUTPUT
SELECT
R:MAIN OUTPUT
SELECT
L:SUB OUTPUT
SELECT
R:SUB OUTPUT
SELECT
LINE/PHONES
Choose this setting if you’re
using headphones, or if the
SY-1000 is connected to a
keyboard amp, mixer, or digital
recorder.
JC-120 RETURN
Choose this setting if the
SY-1000 is connected to the
RETURN jack of the Roland JC-
120 guitar amp.
JC-120 INPUT
Choose this setting if the
SY-1000 is connected to the
guitar input of a JC-120 guitar
amp.
COMBO AMP 1
RETURN
Use this setting when
connecting to the RETURN of
a combo-type guitar amp (in
which the amp and speakers
are in a single unit) equipped
with one speaker.
COMBO AMP 1
INPUT
Use this setting when
connecting to the guitar input
of a combo-type amp (in which
the amp and speakers are in a
single unit) equipped with one
speaker.
COMBO AMP 2
RETURN
Use this setting when
connecting to the RETURN of
a combo-type amp (in which
the amp and speakers are in a
single unit) equipped with two
speakers.
COMBO AMP 2
INPUT
Use this setting when
connecting to the guitar input
of a combo-type amp (in which
the amp and speakers are in a
single unit) equipped with two
speakers.
STACK AMP
RETURN
Use this setting when
connecting to the RETURN of
a stack-type amp (in which
the amp and speaker are in
separate units).
STACK AMP
INPUT
Use this setting when
connecting to the guitar input
of a stack-type amp (in which
the amp and speaker are in
separate units).
BASS AMP
WITH TWEETER
Use this setting when
connecting to a bass amp that
has a tweeter.
BASS AMP NO
TWEETER
Use this setting when
connecting to a bass amp that
does not have a tweeter. The
high-frequency range will be
corrected.
L:MAIN OUTPUT
LEVEL
R:MAIN OUTPUT
LEVEL
L:SUB OUTPUT
LEVEL
R:SUB OUTPUT
LEVEL
0–200
Adjusts the output level.
GLOBAL EQ
This adjusts the tone of the OUTPUT regardless of the equalizer on/
off settings of individual patches.
Parameter
Value
Explanation
STEREO LINK
OFF, ON
If this is ON, the L and R
settings are made at the
same time.
LOW CUT
*1
FLAT, 20.0
Hz–16.0 kHz
This sets the frequency
at which the low cut filter
begins to take effect. When
FLAT is selected, the low cut
filter will have no effect.
L: LOW CUT
*2
R: LOW CUT
*2
LOW GAIN
*1
-20–+20 dB
Adjusts the tone for the low
frequency range.
L: LOW GAIN
*2
R: LOW GAIN
*2
LOW-MID FREQ
*1
20.0 Hz–16.0
kHz
Specifies the center of the
frequency range that will be
adjusted by the LOW-MID
GAIN.
L: LOW-MID FREQ
*2
R: LOW-MID FREQ
*2
LOW-MID Q
*1
0.5–16
Adjusts the width of the
area affected by the EQ
centered at the LOW-MID
FREQ. Higher values will
narrow the area.
L: LOW-MID Q
*2
R: LOW-MID Q
*2
LOW-MID GAIN
*1
-20–+20 dB
Adjusts the tone for the low-
middle frequency range.
L: LOW-MID GAIN
*2
R: LOW-MID GAIN
*2
HIGH-MID FREQ
*1
20.0Hz–
16.0kHz
Specifies the center of the
frequency range that will be
adjusted by the HIGH-MID
GAIN.
L: HIGH-MID FREQ
*2
R: HIGH-MID FREQ
*2
HIGH-MID Q
*1
0.5–16
Adjusts the width of the
area affected by the EQ
centered at the HIGH-MID
FREQ. Higher values will
narrow the area.
L: HIGH-MID Q
*2
R: HIGH-MID Q
*2
