AutoDome Modular Camera System
Getting Started | en
3
Bosch Security Systems, Inc.
VG4-200, VG4-300, VG4-500i Series User’s Manual
F01U073308 | 3.0 | 2007.09
To set an address to a camera without an address:
1.
Select the camera number you want to
FastAddress
. The system displays the camera
number on the keyboard and the image on the corresponding monitor.
2.
Press
#
-
ENTER
(where
#
is the camera number without an address).
3.
Press
ON
-
999
-
ENTER
to invoke an on-screen display of cameras on the system without an
address.
4.
Follow the on-screen instructions. You receive an on-screen confirmation when the
FastAddress
is complete.
To change or clear an address to a camera with an address:
1.
Select the camera number you want to
FastAddress
. The system displays the camera
number on the keyboard and the image on the corresponding monitor.
2.
Press
#
-
ENTER
(where
#
is the camera number with an address).
3.
Press
ON
-
998
-
ENTER
to invoke an on-screen display of all cameras on the system, with or
without an address.
4.
Follow the on screen instructions. You receive an on-screen confirmation when the
FastAddress
is complete.
1.4
Setting Passwords
Passwords are used to control access to locked command menus. Unlocked commands are
available to all users. Passwords are four (4) digits in length.
1.4.1
Special Passwords
To set or change a password (locked command):
1.
Press
OFF
-
90
-
ENTER
to turn off the command lock.
2.
Press
SET
-
802
-
ENTER
to access the password menu.
3.
Tilt the joystick up or down to choose a number. Tilt the joystick right to move to the next
number position.
4.
Follow the on-screen instructions and save the password. You receive an on-screen
confirmation.
i
NOTICE! FastAddress
is stored in nonvolatile memory and does not change if the power is
turned off or if the default settings are restored.
Password
Security Level
0000 (default) Enables security and requires a user to enter the unlock command
OFF
-
90
-
ENTER
before invoking a locked command.
9999
Disables all security and allows all users to access locked commands.
