AutoDome Modular Camera System
Configuring and Using the IP AutoDome | en
43
Bosch Security Systems, Inc.
VG4-200, VG4-300, VG4-500i Series User’s Manual
F01U073308 | 1.0 | 2007.09
Figure 8.2
Network Settings Page
7.
Configure the settings on this page based on the addresses provided by your local
network administrator.
8.
Click the
Set
button to save the settings.
9.
Launch another instance of Microsoft Internet Explorer.
10. Type the original IP address followed by
/reset
(for example,
http://192.168.0.1/
reset
) in the address bar and click
Go
to restart the IP AutoDome. Once you restart the
IP AutoDome, use the new IP Address to access the
LivePage
.
11. Disconnect the IP AutoDome Ethernet cable from the dedicated network switch and
reconnect the Ethernet cable to the local area network (LAN).
i
NOTICE!
Click the
Help on this page?
link if you need more information.
