44
en | Configuring and Using the IP AutoDome
AutoDome Modular Camera System
F01U073308 | 1.0 | 2007.09
VG4-200, VG4-300, VG4-500i Series User’s Manual
Bosch Security Systems, Inc.
8.6
Main Screen
By default, the IP AutoDome opens the
LivePage
window when started. The main screen is
divided into eleven segments as described in
Table 8.1
.
Figure 8.3
IP AutoDome Display Screen
Table 8.1
IP AutoDome Overview
8.7
Viewing Live Images and Controlling the AutoDome PTZ
Once the network cables are properly connected and the IP AutoDome has a valid IP address,
you can view live images and control the PTZ controls over the TCP/IP network using
Microsoft Internet Explorer.
Reference # Description
1
The View-Control tab enables the user to control the camera (see Section
8.6.3).
2
The Aux Control tab is used to enter pre-programmed keyboard control commands.
3
The Camera 1 tab displays live video.
4
The Livepage enables the user to view live video.
5
The Recordings tab enables the user to view and manage recorded video. (This
tab becomes visible only after a recording device is selected on the Settings
page.)
6
The Settings tab enables the user to define General, Encoder, Camera,
Recording, Alarm, and Service settings.
7
The MPEG-4 Stream 1 tab enables the user to view compressed live video
which ensures the data remain low so that local conditions within wide limits
can be adapted.
8
The MPEG-4 Stream 2 tab enables the user to view live video.
9
The M-JPEG tab enables the user to view a JPEG picture compression in each
frame of video.
10
The System log display box contains information about the connection and operating status of the IP
AutoDome (see Section 8.6.4).
11
The Event log display box contains information about alarm connections (see Section 8.6.4).
