50
en | Configuring and Using the IP AutoDome
AutoDome Modular Camera System
F01U073308 | 1.0 | 2007.09
VG4-200, VG4-300, VG4-500i Series User’s Manual
Bosch Security Systems, Inc.
11. Click the
SSL encryption
pull-down list and make a selection. The data for the
connection, for example the password, can be securely transmitted with SSL encryption.
If you have selected the
On
option, only encrypted ports are offered in the
Remote port
parameter.
12. Click the
Audio-connect
pull-down list and select
On
if an active connection should be
reestablished automatically to one of the specified IP addresses after each restart.
13. Click the
Audio
pull-down list and select the
On
option to additionally transmit a
standalone G.711-encoded audio stream with alarm connections.
8.8.1
Sending an Alarm E-mail
The device can be configured to send an e-mail when an alarm has been triggered. You can
send a JPEG image taken from the camera or you can send a pre-defined Short Message
Service (SMS) text message. If you activate this feature, the device sends the e-mail message
to the specified e-mail server when an alarm is triggered. To configure for Alarm e-mails, do
the following:
1.
Open the IP AutoDome
Livepage
, then click the
Settings
tab.
2.
Click the
Alarm Settings
link, then click
Alarm e-mail
. The IP AutoDome displays the
Alarm e-mail
screen.
Figure 8.11
Sending an Alarm E-mail
3.
Select
On
from the
Send alarm e-mail
drop-down list to automatically send an e-mail in
the event of an alarm.
4.
Type the IP address for the e-mail server that receives the e-mail from the device and
then transfers the e-mail to the recipient within the
Mail Server IP address
field.
5.
Type the SMTP Username and SMTP Password necessary to access the e-mail server.
6.
Select one of the following options from the Layout drop-down list:
–
Standard (with JPEG): Sends an e-mail that contains a JPEG image from the video
stream.
–
SMS (max. 160 char.): Sends a text-only e-mail message to a mobile phone.
7.
Check the box to attach a JPEG image from the camera from the video stream, with the e-
mail.
8.
Type the address that receives the alarm-activated e-mail message within the
Destination
address
field.
9.
Type a unique name within the
Sender Name
field to identify the unit that sends the e-
mail. This parameter makes it easier to identify the origin of the e-mail. When finished,
click
Set
to save all settings.
