Bosch VG4 200 Series User Manual Download Page 11

Page: 11 / 98

AutoDome Modular Camera System

On-Screen Display Menu Navigation | en

Bosch Security Systems, Inc.

VG4-200, VG4-300, VG4-500i Series User’s Manual

F01U073308 | 3.0 | 2007.09

On-Screen Display Menu Navigation

The AutoDome is programmed through the on-screen display (OSD) menus. To access the

OSD

menus, you must open the main

Setup Menu

Menus items marked with an

are default settings, unless otherwise noted.

2.1

Setup Menu

The main

Setup Menu

provides access to all programmable AutoDome settings. It is a locked

menu that requires the user to turn off the command lock.

To open the main Setup Menu (locked command):

Press

OFF

ENTER

to turn off the command lock.

Press

ENTER

to access the

Main Menu

Use the joystick to highlight a menu item.

Press

Focus

Iris

to open a menu.

Follow the on-screen instructions.

Setup Menu Choices:

NOTICE!

After a period of 4.5 minutes of inactivity, a menu times-out and exits without

warning. Some unsaved settings in the current menu can be lost.

NOTICE!

The AutoDome displays only those menus applicable to the AutoDome Series

configuration. Use the joystick to navigate through the menu and the

Focus

Iris

keys to make

a selection.

Setup Menu

Exit...

Camera Setup

Lens Setup

PTZ Setup

Display Setup

Communication Setup

Alarm Setup

Language

Advanced

Diagnostics

Focus / Iris: Select

Menu

Description

Exit

Exits the menu.

Camera Setup

Accesses adjustable camera settings such as: white balance, gain,
sharpness, sync, line lock, backlight, shutter, and night mode.

Lens Setup

Accesses adjustable lens settings such as: focus, iris, zoom speed, and
digital zoom.

PTZ Setup

Accesses adjustable pan/tilt/zoom (PTZ) settings such as: Autopan,
tours, PTZ speed, inactivity period, AutoPivot, and tilt limits.

Summary of Contents for VG4 200 Series



































































































Search results

Summary of Contents for VG4 200 Series

Reviews:

Related manuals for VG4 200 Series

Brands by name

Popular brands

Bosch VG4 200 Series, User Manual

Search results

Summary of Contents for VG4 200 Series

Reviews:

Related manuals for VG4 200 Series

Brands by name

Popular brands