58
en | Configuring and Using the IP AutoDome
AutoDome Modular Camera System
F01U073308 | 1.0 | 2007.09
VG4-200, VG4-300, VG4-500i Series User’s Manual
Bosch Security Systems, Inc.
8.9.3
Deleting Recordings
You can delete all recordings in a partition at any time.
X
Click the
Format!
button to delete all recordings in the currently selected partition.
8.9.4
Deleting all Partitions
You can delete all partitions at any time. Individual partitions cannot be deleted.
X
Click the
Delete all partitions
button. The display retains the lines containing the
numbers, the partition names are deleted and
0
is specified as the size in each case.
8.10
Recording Scheduler
The recording scheduler allows you to link the created recording profiles with the days and
times at which the images of selected cameras are to be recorded in the event of an alarm.
You can link any number of 15-minute intervals with the recording profiles for each day of the
week. Moving the mouse cursor over the table displays the time below it, which aids
orientation.
In addition to the normal weekdays, you can define holidays that are not in the standard
weekly schedule on which recordings are to apply. This feature allows you to apply a schedule
for Sundays to other days with dates that fall on varying weekdays.
Figure 8.24
Recording Scheduler
To edit the
Recording Scheduler
, do the following:
1.
Open the IP AutoDome
Livepage
, then click the
Settings
tab.
!
CAUTION!
Check the recordings before deleting and back up important sequences on the computer's
hard drive.
!
CAUTION!
Deleting partitions causes a reorganization of the entire hard drive and all sequences stored
on it are therefore lost.
Consequently, you should check the recordings before deleting any partitions and back up
important sequences on the computer's hard drive.
