AutoDome Modular Camera System
On-Screen Display Menu Navigation | en
15
Bosch Security Systems, Inc.
VG4-200, VG4-300, VG4-500i Series User’s Manual
F01U073308 | 3.0 | 2007.09
Outputs Setup Menu
Outputs Setup Menu Choices
i
NOTICE!
Alarm inputs 1 and 2 provide tamper detection, if programmed as supervised, for
breaks or shorts in an alarm circuit. See the AutoDome Modular Camera System Installation
Manual for wiring instructions.
Outputs Setup...
Exit...
1. Alarm Output 1 N.O.
1-4
Physical
2. Alarm Output 2 N.O.
3. Alarm Output 3 N.O.
Outputs
4. Alarm Relay
N.O.
5. NONE
5-12
Command
Outputs
6. Aux On
1
7. Aux Off
8
8. Shot
99
9. OSD
10. Transmit
11. NONE
12. NONE
Focus / Iris: Select Type
Right / Left: Select Mode
Menu
Description
Sub-menu / Description
Default
Setting
Exit
Saves and exits the menu.
Outputs Setup
Defines physical outputs
and keyboard commands
for use in a rule.
Outputs 1-3
Defines a physical output.
N.O.
: Normally open circuit
N.C.
: Normally closed circuit
N.O.
Alarm Relay
A fixed output available
for use in a rule.
Outputs 5-12
Defines a command
output for use in a rule.
Aux On
: A keyboard
ON
command.
Aux Off
: A keyboard
OFF
command.
Shot
: Recalls a preset shot.
OSD
: An on screen display.
Transmit
: Transmits a message
back to the head end (available
with RS-232 serial connections,
Bilinx, and IP AutoDome models).
AutoTrack
: Turns AutoTrack on or
off as an output. (Available with
500i Series only).
NONE
: No command defined.
NONE
.
Outputs 5 and
6 set to
OSD
and
Shot 1
