Bosch rexroth SB24 Instruction Manual Download Page 70

Page: 70 / 78

70/78

Removal and replacement

Bosch Rexroth AG, Control block SB24/34, RE 66170-B/2019-05-15

11 Removal and replacement

11.1 Required tools

• Suitable tools for mounting as specified on the offer drawing

• Collecting pan to collect any leaking hydraulic fluid.

11.2 Preparing for removal

Take the entire machine out of service as described in the instruction manual for
the machine.

– Relieve pressure in the hydraulic system according to the instructions of the

machine/system manufacturer.

– Make sure the relevant system components are depressurized and deenergized.

Secure the overall system according to the instructions of the manufacturer.

11.3 Removal of control block/control block segment from machine

For disassembly of the control block/control block segment, proceed as follows:

Remove the control block/control block segment in accordance with the
specifications of the machine/system manufacturer.

Place the product on a clean surface with sufficient load-bearing capacity.

Plug all openings.

11.4 Preparing the components for storage or further use

▶

Proceed as described in chapter 6.2 "Storage of control block/control block
segment", section "After removal" on page 54.

Summary of Contents for rexroth SB24















































































Search results

Summary of Contents for rexroth SB24

Reviews:

Related manuals for rexroth SB24

Brands by name

Popular brands

Bosch rexroth SB24, Instruction Manual

Search results

Summary of Contents for rexroth SB24

Reviews:

Related manuals for rexroth SB24

Brands by name

Popular brands