Bosch rexroth SB24 Instruction Manual Download Page 41

Page: 41 / 78

About these products 41/78

RE 66170-B/2019-05-15, Control block SB24/34, Bosch Rexroth AG

CAUTION!

The threaded plugs on the CVL port side

, the EVL closing side

and threaded plugs and must not be removed! The threaded bores are not
designed for connection fittings.

Individual pressure compensator :

Controls the valve-internal inlet flow of the

block-internal channel

Electrohydraulic EHS actuating unit :

Control is realized at port via CAN

bus pilot signal. The received CAN bus pilot signals are converted to respective
deflection of the control spool.

Check valve :

Prevents valve-internal return flow in working port

Thermal PRV in check valve :

The thermal PRV is integrated into the check valve

and is opened in case of an inadmissible temperature-related pressure increase in
the working port. The discharged volume is very low.

Shuttle valve :

Directs the higher LS pressure through the control block/control

block segment.

Cover cap :

Includes the additional function of manual auxiliary actuation for

manual control of the control spool.

CAUTION!

During normal operation, the manual auxiliary actuation must not be

locked and tools must not be applied or attached.

Control is realized via CAN bus pilot signal .

Internal function

Operation / control

Summary of Contents for rexroth SB24















































































Search results

Summary of Contents for rexroth SB24

Reviews:

Related manuals for rexroth SB24

Brands by name

Popular brands

Bosch rexroth SB24, Instruction Manual

Search results

Summary of Contents for rexroth SB24

Reviews:

Related manuals for rexroth SB24

Brands by name

Popular brands