Bosch rexroth SB24 Instruction Manual Download Page 24

Page: 24 / 78

24/78

About these products

Bosch Rexroth AG, Control block SB24/34, RE 66170-B/2019-05-15

The

connecting plate is used for SBx4 blocks with or without central connecting

plate.
The inlet and return lines of the flow are directed via the

connecting plate.

Pressure compensator :

Controls the inlet flow to the connected SBx4 valves

according to the block-internal LS signal.

LS pressure relief valve :

Limits the pressure at the inlet port and indirectly also

the pressure in the block-internal

line by means of the pressure compensator.

Primary pressure relief valve :

Limits the pressure at the inlet port and indirectly

also the pressure in the block-internal

line.

NOTICE!

The primary pressure relief valve with its short response time and low flow

is applied for limitation of the pressure peaks in the supplied flow.

The

connecting plate is not equipped with manual operating elements or external

control functions.

Application

Internal function

Operation / control

Fluidplan

Summary of Contents for rexroth SB24















































































Search results

Summary of Contents for rexroth SB24

Reviews:

Related manuals for rexroth SB24

Brands by name

Popular brands

Bosch rexroth SB24, Instruction Manual

Search results

Summary of Contents for rexroth SB24

Reviews:

Related manuals for rexroth SB24

Brands by name

Popular brands