Bosch rexroth SB24 Instruction Manual Download Page 5 | Manualshive

Page: 5 / 78

background image

About this documentation 5/78

RE 66170-B/2019-05-15, Control block SB24/34, Bosch Rexroth AG

1 About this documentation

1.1 Validity of the documentation

This documentation applies for load-sensing control blocks SB24/34 of
Bosch Rexroth including the following control block segments:

• Connecting plate, central connecting plate, intermediate plate and end plate

• Control valves SB24-M, SB24-EHS and SB34-EHS

• Control valves EHR24-EHS and EHR24-EM2

This documentation applies for all mentioned control blocks and control block
segments independent from their manufacturing date until new revision of
this document.

This documentation is intended for machine/system manufacturers as well as
authorized specialists and dealers.
This documentation contains important information on safe and proper transport,
installation and disassembly, commissioning, operation, maintenance and servicing
of the product.

▶

Read this documentation completely and in particular the chapters 2 "Safety
instructions" on page 9 and 3 "General instructions on property damage and
product damage" on page 14 before starting to work with the control block/
control block segment.

1.2 Required and supplementary documentation

▶

Only commission the product if the documentation marked with the
book symbol

is available, understood and complied with.

Table 1: Required and supplementary documentation

Title

Document number

Document type

Technical data sheet

Contains the permissible technical data.
Please bear in mind that different technical data sheets apply
depending on the version:

Data sheet

Load-sensing control block SB24/34

66170

Load-sensing directional valves in sandwich plate design
SB24-EHS, SB34-EHS

66171

Load-sensing directional valves in sandwich plate design SB24-M

66172

Plates SB24, SB34

66173

Hitch control valves EHR5, EHR24-EM2, EHR24-EHS

66126

Load-sensing control block SB24/34

Contains all information required for directional valve installation

66170-10-R

Manual

Order confirmation

Contains the order-related technical data of the control block.

Order confirmation

Offer drawing

Contains the outer dimensions, all connections and the hydraulic
circuit diagram of the control block.

Offer drawing

«
...
3
4
5
6
7
...
»

Summary of Contents for rexroth SB24















































































Reviews:

No comments

Related manuals for rexroth SB24

Brand: GE Pages: 425

Brand: Hankscraft Runxin Pages: 53

Brand: Panasonic Pages: 15

Brand: Panasonic Pages: 42

Brand: VAT Pages: 26

Brand: Hama Pages: 7

Brand: Hama Pages: 44

Brand: RadioMaster Pages: 10

Brand: K&K Pages: 6

Brand: HandyTrac Pages: 14

Brand: TA Pages: 6

Digiplex DGP-848

Brand: Paradox Pages: 20

Brand: Panamax Pages: 16

CEmarking RCX221

Brand: Yamaha Pages: 468

Brand: Nice Pages: 120

Brand: K&K Pages: 10

Brand: Quickie Pages: 64

Brand: Kamstrup Pages: 7

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands