Safety instructions 13/78
RE 66170-B/2019-05-15, Control block SB24/34, Bosch Rexroth AG
CAUTION
Risk of injury due to sharp edges and rough surfaces!
When working on and transporting the control block/control block segment,
there is a risk of injury, e.g. due to sharp edges at the valve housing, threads
or attachments.
▶
Wear appropriate personal protective equipment (e.g. safety shoes, safety
goggles, safety gloves and suitable working clothes).
Danger of bruising and knocks for limbs!
In the gap between the actuation element and the valve housing, there is a risk
of injury
▶
Do not move any limbs into the gap between the actuation element/hand lever
and the valve housing.
Hot surfaces at control block/control block segment!
Risk of burning!
▶
Allow the control block/control block segment to cool down sufficiently before
touching it.
▶
Protect yourself with heat-resistant protective clothing, e.g. gloves.
Contact with hydraulic fluid!
Danger to health / damage to health, e.g. eye injury, skin damage, toxication in the
event of inhalation!
▶
Avoid any contact with hydraulic fluids.
▶
When handling hydraulic fluids, the safety instructions of the lubricant
manufacturer need to be observed at all times.
▶
Use your personal protective equipment (e.g. safety goggles, safety gloves,
suitable working clothes, safety shoes).
▶
Immediately seek medical attention, however, if hydraulic fluid gets into your
eyes or blood circuit or if you swallow it accidentally.
Danger from improper handling!
Slip hazard! When using the control block/control block segment as climbing aid,
there is a danger of slipping on wet and/or fluid-afflicted surfaces.
▶
Do not use the control block/control block segment as handle or step.
▶
Check how to safely get on top of the machine/system.
2.7 Personal protective equipment
The personal protective equipment is the responsibility of the user of the control
block/control block segment. Observe the safety regulations in your country.
All pieces of personal protective equipment should be intact.
