1-2
Introduction to the system
ECODRIVE DKC02.1 Drive Controller
DOK-ECODRV-DKC02.1****-PRJ2-EN-P
DKC02.1 drive controller with SERCOS
interface
AC MKD
servo motor
Control unit
Linear scale
FP5101F5.fh5
M
3~
~
~
SERCOS
interface
SERCOS
interface
Drive processor
Fine interpolation
Position control
Speed
control
Torque
control
Field-oriented
stator current
control
Parameters
Diagnosis
Operating data
High-resolution
positioning interface
High-resolution
positioning interface
Fig. 1-1:
Interworking of the control, digital drive controller, and AC motor
The drive controller DKC02.1 features the SEROS interface as control
interface.
The SERCOS interface is a serial real-time communication system. The
control and drives are interconnected in a ring via a fiber optic cable. Data
is exchanged serially between the control and drives over this fiber optic
cable.
This drive interface has been the international standard for CNC ma-
chines since 1995.
The SERCOS interface offers users the following features which are im-
portant for data transmission between bus systems.
•
The ring structure reduces the wiring to a minimum. Fiber optic cables
ensure the highest possible noise immunity while at the same time of-
fer high data transfer rates.
•
All exchangable data, parameters and commands used in operation
have been standardized.
•
The SERCOS interface makes it possible to conduct an extensive di-
agnosis and parameterize the drives via terminals from SERCOS in-
terface compatible controls. This reduces startup times and downtimes
considerably.
•
Drives and CNC controls from various manufacturers can be used to-
gether in any combination.
SERCOS interface
Features of the SERCOS
interface
LSA Control S.L. www.lsa-control.com [email protected] (+34) 960 62 43 01
