2
Important directions for use
2.1
Appropriate use
2.1.1
Introduction
Rexroth products are developed and manufactured to the state-of-the-art.
They are tested before delivery to ensure operational safety and reliability.
Personal injury and property damage by us‐
ing products incorrectly!
WARNING
The products have been designed for use in an industrial environment and
may only be used in the appropriate way. Failure to use them in the appropri‐
ate way may cause situations resulting in property damage and personal in‐
jury.
Rexroth as the manufacturer cannot honor any warranty, liability
or compensatory claims for damages resulting from inappropriate
use. The user alone bears the risks of inappropriate use of the
products.
Before using Rexroth products, make sure that all the pre-requisites for an
appropriate use of the products are satisfied:
●
Personnel that in any way, shape or form uses our products must first
read and understand the relevant safety instructions and be familiar with
their appropriate use.
●
Leave hardware products in their original state, i.e., do not make any
structural modifications. Do not decompile software products or alter
their source codes.
●
Do not install damaged or faulty products or put them into operation.
●
Make sure that the products have been installed in the manner descri‐
bed in the relevant documentation.
2.1.2
Areas of use and application
Drive controllers made by Rexroth are designed to control electric motors and
monitor their operation.
Controlling and monitoring the drive controllers may require additional sen‐
sors and actuators.
The drive controllers may only be used with the accessories and
attachments specified in this documentation. If a component has
not been specifically named, then it may neither be mounted nor
connected. The same applies to cables and lines.
Operation is only permitted in the specified configurations and
combinations of components using the software and firmware as
specified in the relevant Functional Descriptions.
Drive controllers have to be programmed before commissioning to ensure
that the motor executes the specific functions of an application.
Drive controllers of the Rexroth IndraDrive ML series have been developed
for use in single- and multi-axis drive and control tasks.
DOK-INDRV*-HXX05******-PR02-EN-P
Bosch Rexroth AG
31/407
Rexroth IndraDrive ML Drive Systems with HMU05
Important directions for use
