Bosch Rexroth HMU05.1N Series Project Planning Manual Download Page 49

Page: 49 / 410

4.3

Configuring the drive system

4.3.1

Firmware

Firmware and device types

See

chapter "Firmware" on page 27

4.3.2

Motors

Third-party motors

General information on third-party motors
Why use third-party motors on Rexroth IndraDrive ML drive control‐

lers?

Today, machine axes are mainly moved with electric drives. Standard motors

are used in most cases, as this is the most cost-efficient solution.

Special requirements

Due to special requirements on machine axes, design or safety-related as‐

pects, it may be necessary for the machine manufacturer to use a motor de‐

sign diverging from the standard.

Motor designs not included in

product range

In these cases, the drive suppliers are required to also create drives with mo‐

tors not in their own inventory due to their special design.

Checking before use

Third-party motors can be used on drive controllers from the

Rexroth IndraDrive ML device range. Check whether or not the third-party

motor meets the requirements for use.
The functional description of the firmware contains motor data forms. Obtain

the completed form for testing the suitability of a third-party motor.

Which directives are important?

In accordance with the legal regulations (EU Directive EMC 89/336/EEC and

the German EMC laws), installations and machines must be designed and

built in accordance with the present state-of-the-art of standardization.
In order to comply with the machine directives regarding "electromagnetic

compatibility (EMC)", a conformity test must be carried out on the drive sys‐

tem (motor with controller and connection design). The machine manufactur‐

er has to guarantee the test of the drive system and compliance with the di‐

rectives.

Controllable third-party motors

Motor types

The following motor types can be controlled:
●

Asynchronous motors, rotary

●

Asynchronous motors, linear

●

Synchronous motors, rotary

●

Synchronous motors, linear

These motors can be operated within the scope of the technical data of the

selected Rexroth IndraDrive ML drive controller. If motors come with a hold‐

ing brake, it should be controlled by the drive controller. Make sure that the

relevant technical data for the motor holding brake complies with that of the

holding brake output.

For third-party motors, Rexroth usually does not guarantee the

performance data of the motor shaft.

DOK-INDRV*-HXX05******-PR02-EN-P

Bosch Rexroth AG

47/407

Rexroth IndraDrive ML Drive Systems with HMU05

Combining the individual components

Summary of Contents for Rexroth HMU05.1N Series



























































































































































































































































































































































































































Search results

Summary of Contents for Rexroth HMU05.1N Series

Reviews:

Brands by name

Popular brands

Bosch Rexroth HMU05.1N Series, Project Planning Manual

Search results

Summary of Contents for Rexroth HMU05.1N Series

Reviews:

Brands by name

Popular brands