Starting procedure
When starting the machine for the first time fill the drive circuit (see
"Procedure to fill the drive circuit" on page 310
To start the machine, proceed as described.
1
Open the ball valves (A - B - C - D).
2
Make sure that there is fluid flowing through the
customer side circuit.
3
Turn the main disconnect switch (F) to the "ON"
position. The indicator lamp (G) lights up.
4
Turn the key selector (E) to "automatic" posi‐
tion.
Machine start-up must be performed using the
operating terminal of the machine to be cooled,
via the "ENABLE" connection (see
"ENABLE, UNIT ERROR and UNIT WARNING
).
Tab. 8-101:
Starting procedure
Bosch Rexroth AG
DOK-INDRV*-HXX05******-PR02-EN-P
308/407
Rexroth IndraDrive ML Drive Systems with HMU05
Cables, accessories, additional components