Bosch Rexroth CytroMotion, Operating Instructions Manual

Page: 9 / 60

9 / 60
Self-contained axis
Improper use
Bosch Rexroth AG RE62290-B, 05.22
2 Safety instructions
2.1 General information on this chapter
Observe the general safety instructions in this chapter and the safety instruc-
tions and instructions for action in this documentation. This helps avoid per-
sonal hazards, damage to property and faults.
●
Read this documentation completely and thoroughly before working with the
product.
●
Keep this documentation in a location where it is accessible to all users at
all times.
●
Always include the required documentation when passing the product on to
third parties.
2.2 Intended use
The self-contained axis is a drive unit consisting of a cylinder (including con-
nection tubes), motor-pump group, compensator , valve block (optionally with
a hood) and an optional position measurement system. The exact scope of
delivery is indicated in the order confirmation.
The self-contained axis is an electric and hydraulic system component.
According to directive 2006/42/EC by the EU and EN 982, the self-contained
axis is a component that is not ready for use. Only use the axis for installation
into systems! According to the Pressure Equipment Directive 97/23/EC (article
1 / section 3.10), the axis is not to be classified as a pressure vessel but as
hydraulic controlling equipment as the pressure is not the decisive factor for
the construction but rigidity, dimensional stability and stability against static
and dynamic operating loads.
The self-contained axis is intended for use in production machines.
The product is only intended for professional use and not for private use.
Intended use includes having read and understood this documentation and
especially this chapter.
The commissioning of the self-contained axis may only take place after the nec-
essary safety requirements have been fulfilled by the machinery and/or system.
Operation is only permitted with the system in its original state, and when
undamaged and completely assembled.
The self-contained axis may only be operated within its specified perform-
ance/limit data. Overloading the system leads to a failure of the proper func-
tion. Observe the performance/limit data in the technical
⮫
data sheet of the
self-contained axis.
Installation and expansion of the machinery as well as replacing components
in the scope set down in the operating instructions may only be performed
by Bosch Rexroth or by authorized and trained personnel from a specialist com-
pany authorized by Bosch Rexroth (see
⮫
Chapter 2.4 Qualification of personnel
on page 10 ). Other repairs may only be carried out by the manufacturer.
2.3 Improper use
Any use deviating from the intended use is improper and thus inadmissible.
Bosch Rexroth AG does not assume any liability for damage caused by improper
use. The user assumes all risks involved with improper use.
The installation or use of inappropriate products in safety-relevant applications
could result in unintended operating states which in turn could cause personal
injuries and/or damage to property. Therefore, please only use a product for