Bosch Rexroth CytroMotion, Operating Instructions Manual

Page: 15 / 60

15 / 60
Self-contained axis
Bosch Rexroth AG RE62290-B, 05.22
3 General information on damage to property
and damage to the product
The warranty only applies to the delivered configuration.
●
The claim to warranty expires if the product is assembled, commissioned
and operated incorrectly, not used as intended and/or handled improperly.
●
The following safety instructions apply to chapters 6 to 14.
NOTICE
Welding and painting work! Risk of damage! Electrostatic
charging can destroy electronics.
−
Avoid electrostatic charging of electronic compo-
nents.
NOTICE
Painting work! Risk of damage! Contact surfaces may be
damaged. Risk of overheating due to insufficient heat
radiation and impaired functionality of measurement sys-
tems.
−
Never paint measurement systems, cooling and con-
tact surfaces.
NOTICE
Inadmissible mechanical load! Risk of damage! Any
mechanical load, particularly sudden impact or similar
forces, may damage or even destroy the self-contained
axis.
−
Avoid impacts against the attachment parts of the
self-contained axis.
−
Do not put or place the self-contained axis onto the
attachment parts.
−
Never use the self-contained axis to sit or step on. Do
not place/put any objects on top of it.
NOTICE
Foreign particles and dirt in the system! Risk of damage,
wear and malfunctions due to ingress of dirt and for-
eign particles. Contamination and metal particles may
damage the self-contained axis and cause leakage.
−
Check before commissioning whether all hydraulic
connections are tight and that all the seals and caps
of the plug-in connections are correctly installed and
undamaged.
−
Ensure that no cleaning agents are able to penetrate
the hydraulic system.
−
Do not use cotton waste or linting cleaning cloths for
cleaning.
NOTICE
Wear! Wear may lead to malfunctions.
−
Perform the prescribed maintenance work at the
intervals specified in the operating instructions.
NOTICE
Hydraulic fluids harmful to the environment! Leaking
hydraulic fluid leads to environmental pollution.
−
Immediately remedy possible leakage. Use an oil
binding agent in order to bind the leaked hydraulic
fluid.
−
Dispose of the hydraulic fluid in accordance with
the currently applicable national regulations in your
country.
−
Please immediately contact Bosch Rexroth Service,
see
⮫
Chapter 16.1 Service and support on page 55 .