Bosch MUC22 Series, Instruction Manual

Page: 7 / 268

7
en
Before using for the fi rst time
i my mode
Quick setting mode for customising
the preparation time and temperature
setting for a cooking process.
Before using for the
fi rst time
Before the new appliance can be used,
this must be fully unpacked, cleaned and
connected to the power outlet. To do this,
perform the following steps:
1. Remove the appliance and all accessory
parts from the packaging.
2.
Use the carrying handle to lift up the
appliance. Swing the carrying handle
upwards accordingly.
Caution!
You must use only the carrying handle.
This also applies for safe transport of the
appliance.
3. Place the appliance on a stable, level
and smooth work surface.
Caution!
There must be no sensitive surfaces and
appliances above and behind the appliance
that may be damaged by the temperature
development and the escaping steam.
4. Remove the steam outlet
Grip the steam outlet at the rear and pull
up and off.
5. Open the lid of the appliance
Press the opening button on the lid.
6. Remove the lid insert
Grip both fl anges on the left and right of
the lid insert, then pull out and remove
the lid insert.
7.
Lift the pan out of the appliance interior.
8. Remove the packaging material that
is on the appliance and the accessory
parts.
9.
Check all parts for completeness.
X
Fig.
A
MUC2_MUC4_EU2.indb 7 15.03.2016 12:58:35