MAP 5000
Installation | en
37
Bosch Security Systems B.V.
Installation manual
2019-09 | 25 | F.01U.168.332
2.
Position the ferrite core as close as possible to the enclosure knockout inside the
enclosure.
Ferrite core
2.13
Installing the ICP-COM-IF relay module
The ICP-COM-IF relay module can be mounted on the hinged mounting plate or the mounting
rails of the MAP control panel enclosure.
A clearance of approx. 15
mm is required on either side for subsequent wiring. The terminal
plugs can be unplugged laterally.
1.
Attach the carrier plate of the ICP-COM-IF relay module in the holes provided in the
hinged mounting plate or the mounting rails.
2.
Use the screw provided to secure the carrier plate to the bottom rail.
