Bosch DIVAR AN 5000, Operation Manual

Page: 55 / 170

UPnP
Figure 6.16: Network UPnP
This protocol enables a mapping relationship between the LAN and the WAN
Enter here:
–
PAT Enable/Disable - enable or disable the UPnP function on this device
– Status – Can be Success, Searching or Unknown (when the system is offline)
– Router LAN IP
– Router WAN IP
The bottom table shows the PAT (port mapping list) with a one-to-one relationship with the
router port mapping setting:
–
Click the relevant checkbox to enable a port.
– Double-click a port to change a setting
– Select a port and click <Delete> to remove a port setting
– Click <Add to the list> to open a ‘Port info’ dialog box to add a new port setting
6.6.7
DIVAR AN 3000 / DIVAR AN 5000 Configuration | en 55
Bosch Security Systems Operations Manual 2015.10 | v2.3 | AM18-Q0669