MS-301 Multi parameter Water Quality Sensor
Web:www.boquinstrument.com
Chapter 5 Setting and operation of hand manipulator
5.1 Setting
Press the blue switch key on the hand manipulator for some time, and then the starting up interface will
be displayed just as showed below in the diagram.
5.1.1 Setting of Bluetooth
1)Press the key of direction, choose the key of “setting”, and press the key of “Enter” to get in. And then
press the key of direction again to choose “controller set”, and press the key of “Enter” to get in. Then,
choose “bluetooth” to get in, and choose “start”. At last, press the key of “Enter” to open the Bluetooth
function of hand manipulator. Note: to be sure that the integrated multi parameter water quality sensor is
starting up in the process of operation by hand manipulator. Please check the details in Chapter 3.2.
2)Press the key of direction downward to choose “configuring”, and press “Enter”. Press the key of
direction rightward to choose “scan” when the words of “configuration” occurs on the lower part of
screen. Press the key of “Enter”, and the words of “waiting for 10s” will occur on the lower part of screen.
And then, a string of Bluetooth numbers showed in the “nearby device” will occur on upper part of screen,
Press the key of direction to choose the same Bluetooth numbers that occur on the label of the integrated
multi parameter water quality sensor of the integrated multi parameter water quality sensor to match, and
then click the key of “test” to connect. The process is showed by the diagram as below.
3)Withdraw from the Bluetooth setting by pressing the key of “Esc”