Integrated Multi-parameter Sensor Operation manual
30
2
）
Press the key of direction to choose “controller set”, and press the key of “Enter” to get in. The process
is showed by diagram as below.
3
）
Press the key of direction to choose “probe configuring”, and press the key of “Enter” to get in. Choose
“read”, and then the option of initial access probe will occur. So, choose “read” first. If the existing probe
does not occur, please revise the related options by manual operation, and then choose the option of
“manual configuring”. At last, press the key of “Enter”, and the result will be showed by diagram as
below. (If the change of electrode is needed, the operation of power-off is needed! )
5.1.4 Time setting
The time setting for new product is according to Beijing time. If it is necessary, the customers can reset
the local time by the keys of direction and numbers in the menu of time setting.