Boost i830 User Manual Download Page 18

Page: 18 / 152

Getting Started

4 When charging the battery for the first time,

charge for 30 minutes longer than the time shown
in “Charging Times”.

Charging Times

See your battery and charger to determine the
appropriate charging time.

For best results, charge the batteries within the
temperature range of 50°F to 104°F (10°C to 40°C).

Prolonged charging is not recommended.

Removing the Battery

1 With the phone powered off, remove the battery

door.

2 Remove the battery by lifting it out from the side.

Battery Use and Maintenance

• The Motorola iDEN Approved Lithium Ion

chargers provide optimum performance. Other
chargers may not fully charge the iDEN Lithium
Ion battery or may yield a reduced number of
lifetime charge cycles.

• Extreme temperatures degrade battery

performance. Do not store the battery where
temperatures exceed 140°F (60°C) or fall below
4°F (-20°C).

Battery

Charger

Rapid

Standard

Slim SC

2 hours

3 hours

High
Performance
SC

2 hours

4 hours

Summary of Contents for i830

























































































































































Search results

Summary of Contents for i830

Reviews:

Related manuals for i830

Brands by name

Popular brands

Boost i830, User Manual

Search results

Summary of Contents for i830

Reviews:

Related manuals for i830

Brands by name

Popular brands