8.8“ Touchscreen Colour Display AHD 880 TC
Operation
V5
49
The selected parameters can be set to the desired value with the
“Next Step / Increase Value” or “Previous Step / Decrease Value”
keys:
The parameter “Units” allows to switch between the two following
unit systems:
metric display (°C, bar, liters/h)
Imperial display (°F, psi, gal/h)
In this case, the only option is to switch to Imperial display (see list
of available parameters).
The green selection frame remains until another parameter has
been selected or the configuration page is exited.
After the change has been completed, the configuration page is
displayed as follows:
Accept New Settings
The new setting is automatically accepted as soon as another pa-
rameter has been selected of the configuration page is exited.
TIP!
Accepting a parameter change does not require a
special confirmation. In case of erroneous input, the
previous value must be restored prior to leaving the
selected field!
Available Parameters
– Configuration Page Standard Settings
Parameter
Value Range
Hours
00
– 11
(when parameter 12/24h is set to
“am/pm”)
00
– 23
(
when parameter 12/24h is set to “24h“)