8.8“ Touchscreen Colour Display AHD 880 TC
Operation
42
V5
7.3
Measuring Point Pages
7.3.1 General Information
TIP!
The Color Display AHD 880 TC’s graphics and sensor data
displayed on the measuring point pages can be adjusted to
the individual requirements of each project. The following im-
ages of the measuring point pages are therefore only for de-
monstrative purposes to explain the operating functions via the
device’s keys.
The measuring points page consists of a header line, containing the following
information:
Left display field: current time
(time configurable via configuration page)
Middle display field: designation of page
Right display field: a logo during normal operating conditions; in case of
alarm, an alarm message and display of the number of current system
alarms
The data field representing the corresponding analogue and binary measuring
points is located below the header line. For analogue measuring points,
graphic representation (e.g. instruments or bar graphs) or, as is usually the
case for binary measuring points, tabular format, is supported.
7.3.2 Graphic Measuring Points Page with Round Instruments and Digital Displays
The following example shows a measuring point page for monitoring an STB
propulsion engine. The red indicator at the top right points to 4 current alarms.
These are listed on the alarm page.
Measuring points page
with round scale instru-
ments and digital dis-
plays