8.8“ Touchscreen Colour Display AHD 880 TC
Installation and Initial Startup
38
V5
6.3
Initial Startup
1.
Establish the 9 - 32 V DC power supply for the Color Display
AHD 880 TC according to technical specifications or project
drawings.
2.
Establish the power supplies for all devices connected to the
Color Display AHD 880 TC according to the corresponding op-
eration manuals.
3.
Test the power supplies.
CAUTION!
Property damage from improper voltage!
Connecting an incorrect supply voltage can lead to
property damage.
Therefore:
– Review all relevant project documents and op-
eration manuals of the devices used and verify
their correct supply voltage and polarity before
connecting them.
4.
Switch on the power supply of the Color Display AHD 880 TC
and all connected external devices from the corresponding
circuit breakers in the power distribution and the device inter-
nal starting devices according to the corresponding operation
manuals.
5.
Verify the correct startup sequence according to the chapter
titled “Operation.”
6.
Log any errors or functional deviations that may occur and
correct errors through proper measures, referring to the errors
described in
the chapter titled “Errors.”
7.
You may need to review the installed configuration and adjust
it to the necessary operating conditions. Log the final configu-
ration for the project documentation.