8.8“ Touchscreen Colour Display AHD 880 TC
Installation and Initial Startup
36
V5
6.2
Installation
General Information
CAUTION!
Property damage from improper handling and
selection of installation locations!
Installing the products in locations that to not meet
the requirements of the technical specifications
and improper handling can lead to system errors
and property damage.
Therefore:
– Observe the products’ technical specifications
when selecting the installation location.
– Only trained personnel may perform the instal-
lation.
– Never install the products in areas that are not
of the required protection class.
– Never install the products in extreme high or
low temperature areas.
– Never install the products on ceilings that can-
not support their weight.
– Never bump or shake the products vigorously.
Installation Requirements
All required connecting cables are of the required version,
equipped with plug connectors according to technical specifica-
tions or project drawings, led to the intended installation loca-
tion, and are properly installed and stripped. Free cables are of
sufficient installation length and are secured against short cir-
cuit and earth fault.
The product is not connected to the supply voltage and
switched off-circuit.
Installation
1.
Install the Color Display AHD 880 TC properly in the intended
installation location according to technical specifications or
project drawings.
2.
Wire all inputs and outputs of the unit according to project
drawings.
