manualshive.com logo in svg

BOMBARDIER Challenger 601-3A CL-600-2B16, Pilot Training Manual

The BOMBARDIER Challenger 601-3A CL-600-2B16 is a powerful and sophisticated private jet, renowned for its exceptional performance and luxurious amenities. To ensure you have all the necessary knowledge and skills to fly this aircraft, we provide a comprehensive Pilot Training Manual available for free download on our website manualshive.com.

Share
Download
background image

Emergency Stow

If the REVERSER UNLOCKED light remains
illuminated or cycles on and off during flight,
pushing the switchlight will back up the au-
tostow system by applying a separate and con-
t i n u o u s   e l e c t r i c a l   s t ow   c o m m a n d   t o   t h e
pneumatic drive unit.

The amber REVERSER UNLOCKED light will
remain illuminated as an indication that the
emergency stow system has been actuated.

Thrust Lever Retard System

An automatic thrust lever retard system is in-
stalled and mechanically interfaced with the
translating sleeve. Uncommanded movement
beyond 11/2 inches of the translating sleeve
will result in retarding of the thrust lever to
IDLE. A lock is then applied to prevent for-
ward movement of the thrust lever.  If the re-
verser can be stowed, this lock is removed.

OPERATION

As part of the Before Landing Checklist, the
thrust reverser switchlights are selected to the
ARMED position. Check that the ARMED
legends are illuminated.

D o   n o t   a r m   a   t h r u s t   r eve r s e r   i n
f l i g h t   i f   t h e   U N S A F E   TO A R M
light is illuminated

After touchdown, when weight on wheels or
wheel spin-up is being sensed and the thrust
lever at idle, unlatch and raise the thrust re-
versers levers and hold gently against the
solenoid stops. Check that both amber RE-
VERSER UNLOCKED lights illuminate, fol-
lowed in approximately 2 seconds by both
green REVERSER THRUST lights. Then
move the thrust reverser levers aft to obtain re-
verse thrust proportional to the amount of aft
lever movement. When ground speed decreases
to 80 knots, move the reverser levers forward
to a minimum reverse thrust position.

When thrust reversers are no longer required,
move the thrust reverser levers to the full
stow position. The REVERSE THRUST light
and the REVERSER UNLOCKED light on the
glareshield will extinguish.

Moving the reverser lever rapidly
from the full reverse thrust position
to the stow position will increase
ground speed because to the residual
engine thrust during spooldown.

FlightSafety Canada 

L t é e
L t d .

CL-600-2B16 PILOT TRAINING MANUAL

CL 601-3R 

7-27

FOR TRAINING PURPOSES ONLY

CAUTION

CAUTION

Summary of Contents for Challenger 601-3A CL-600-2B16




























































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Challenger 601-3A CL-600-2B16

Laser 6205 Manual preview
6205
Brand: Laser Pages: 8
Wacker Neuson WP Operator'S Manual preview
WP
Brand: Wacker Neuson Pages: 54
jbc PA120 Quick Start Manual preview
PA120
Brand: jbc Pages: 4
Parkside PHLG 2000 SE - MANUEL 2 Bedienungs- Und Sicherheitshinweise preview
PHLG 2000 SE - MANUEL 2
Brand: Parkside Pages: 30
Parkside PES 200 B1 Operation And Safety Notes Translation Of Original Operation Manual preview
PES 200 B1
Brand: Parkside Pages: 56
Parkside PDSP 1000 B2 Operation Manuals preview
PDSP 1000 B2
Brand: Parkside Pages: 53
Parkside PAR 10.8 A1 Operation Manual preview
PAR 10.8 A1
Brand: Parkside Pages: 73
Parkside PBH 1500 A1 Translation Of Original Operation Manual preview
PBH 1500 A1
Brand: Parkside Pages: 20
Parkside PHLG 2000 SE - MANUEL 2 Manual preview
PHLG 2000 SE - MANUEL 2
Brand: Parkside Pages: 5
Parkside PFE 50 A1 Instruction Manual preview
PFE 50 A1
Brand: Parkside Pages: 55
Parkside PFE 50 A1 Original Instructions Manual preview
PFE 50 A1
Brand: Parkside Pages: 55
Parkside PAHKS 18V Manual preview
PAHKS 18V
Brand: Parkside Pages: 10
Parkside PGKGA 40-Li B2 Translation Of The Original Instructions preview
PGKGA 40-Li B2
Brand: Parkside Pages: 288
Parkside PDSS A1 Operation And Safety Notes Translation Of Original Operation Manual preview
PDSS A1
Brand: Parkside Pages: 35
Parkside PDSS A1 Operation And Safety Manual preview
PDSS A1
Brand: Parkside Pages: 35
Parkside PMFW 310 D2 Translation Of The Original Instructions preview
PMFW 310 D2
Brand: Parkside Pages: 50
Parkside PDMH 4500 A2 Operation Manual preview
PDMH 4500 A2
Brand: Parkside Pages: 45
Parkside PDMH 4500 A2 Operating Instructions Manual preview
PDMH 4500 A2
Brand: Parkside Pages: 78

Brands by name

Popular brands

Load more brands