Bolin Technology EX1020BHD-L5NXGA, User Manual

Page: 48 / 65

48
Maintenance
Upgrading the Device
If the device is managed by the central management server and you want to upgrade the devices in batch mode, it is
recommended to perform the upgrade operation on the central server. For detailed steps, see the user manual for the
central management server.
1. Click Setup > System > Maintenance .
2. Under Firmware Upgrade , click Browse and select the correct upgrade file.
3. (Optional) Select the check box to enable Upgrade Boot Program .
4. Click Upgrade and then confirm to start. The camera will restart automatically after the upgrade is
completed.
NOTE:
•
You must use the correct upgrade file for your camera. Otherwise, unexpected results may occur.
•
The upgrade file is a ZIP file and must include all the necessary files.
•
The boot program loads the operating system and then the system starts running. The upgrade boot program function
is disabled by default, and only the camera will be upgraded to the latest version. If enabled, both the camera and the
boot program are upgraded, and the operating system of the following new versions can be booted properly and the
camera can be upgraded conveniently.
•
Ensure that the power supply is normal during upgrade. The device will restart after the upgrade is completed.
Restarting the System
1. Click Setup > System > Maintenance .
2. Under Device Restart , click Restart . The device will restart after you confirm the operation. You may also
enable auto-restart by selecting Enable Auto Restart and setting a time for auto-start. The device will restart
at the set time.
3. Perform this operation with caution because restarting the system interrupts the ongoing service.
Importing and Exporting System Configuration File
Export the current configurations of the camera and save them to the PC or an external storage medium. You can also
quickly restore configurations by importing backup configurations stored on the PC or an external storage medium back
to the camera.
CAUTION:
•
After you perform the Default operation, all settings are restored to factory defaults, except the following: login
password of the system administrator, network settings, and system time.
•
Make sure you import the correct configuration file for your camera. Otherwise, unexpected results may occur.
•
The camera will restart when the configuration file is imported successfully.