Bolin Technology EX1020BHD-L5NXGA, User Manual, Page: 22 / 65

22
b. When Storage Full
i. Overwrite Recording: When the assigned storage space on the computer is used up, the camera
deletes the existing recording files to make room for the new recording file.
ii. Stop Recording: When the assigned storage space on the computer is full, recording stops
automatically.
4. Click Save .
Network Configuration
TCP/IP
Modify communication settings such as the IP address for the camera so that the camera can communicate with other
devices.
NOTE:
•
After you have changed the IP address, you need to use the new IP address to log in.
•
The configurations of DNS (Domain Name System) server are applicable when the device is accessed by domain
name.
1. Click Setup > Network > TCP/IP.
2. Select Static IP from the IP Obtain Mode drop-
down list.
3. Enter the IP address, subnet mask, and default
gateway address. Make sure that the IP address of
the camera is unique in the network.
4. Click Save .
If a gatekeeper or firewall is used in the network, Universal Network Passport (UNP) can be used to interconnect the
network, and the UNP server will assign an IP address to the connected cameras.
1.
Select Enable for UNP Service.
2. In the UNP Server IP text box, enter an IP address for the UNP
server. Select Yes to enable authentication, and then set the
username and password for UNP authentication.
3. Click Save .
NOTE:
•
This function is not supported by some models, please see the actual model for details.