Bolin Technology EX1020BHD-L5NXGA, User Manual

Page: 39 / 65

39
iii.
Plan drawing using a mouse is only supported by IE versions later than 8.0. After setting the plan for
one day, you can apply the same settings to other days by clicking
Copy and Paste .
iv.
Drag the mouse to draw a plan and Edit time periods in the table.
7.
Click Save .
Configuring Audio Detection Alarm
The camera can detect input audio signals for exceptions. When the rise or fall of volume exceeds the set limit, or when
the input volume reaches the threshold, the camera reports an alarm and triggers the set actions. Make sure that an audio
input device is correctly connected to the camera and audio input is turned on in
Configuring Alarm Input.
1. Click Setup > Events > Common Alarm > Audio Detection .
2. Select Enable for Audio Detection , select a detection type and set the difference or threshold. To disable audio
detection, clear the Enable check box. The following table describes some major parameters.
a.
Detection Type
i. Rise Above: An alarm is reported when the rise of volume exceeds the difference.
ii. Falls Below: An alarm is reported when the fall of volume exceeds the difference.