47
SYMPTOM
POSSIBLE REMEDY
Troubleshooting
Your joystick does not
work after installing the
board.
The joystick is not
working properly in some
programs.
You cannot record any
sound using a
microphone.
There is no sound or the
sound is distorted when
you are running
Windows Sound System
applications.
Your speaker phone does
not work
a) The joystick port on the SE1440 may be
disabled. Run the C:\SE1440\CSACSET
utility to enable the game port.
b) There is a conflict between the game port
on the sound card and the game port in your
system. Remove the additional joystick from
your system.
The CPU speed of your computer might be
too fast. You might want to reduce the speed.
Refer to your computer’s manual for
instructions on setting up your computer’s
operating speed.
a) If your microphone has an On/Off switch,
make sure the switch is turned on.
b) Make sure you plug the microphone into
the mic-in connector.
c) The microphone must be a mono Electret
(condenser), or dynamic type, with a
resistance of no greater than 600 ohms.
You need the Microsoft Audio Compression
Manager to play compressed files in
Windows Sound System applications. Make
sure you have the following line in the
[drivers] section of your system.ini file:
wavemapper=msacm.drv
Refer to the documentation for your
communications software.
Summary of Contents for SoundExpression 14.4VSP
