35
Driver Installation
4. You are then asked three questions regarding Sound Blaster
compatibility: I/O address, interrupt, and DMA channel.
5. Next, you are asked if you want to enable the MPU401 interface. The
MPU401 is an interface to an external keyboard synthesizer or
wavetable adapter card. Select YES to enable this port now. You can also
enable the MPU401 interface later with the CSACSET DOS utility.
6. After completing the prior step, files are copied and your system files
(autoexec.bat, config.sys) are updated. You will then need to reboot your
system. Installation of DOS drivers is complete. If you add Windows
later, you will need to run this setup in Windows. If you haven’t already
done so, install CD-ROM drivers provided by the manufacturer of your
CD-ROM drive. Then proceed to your sound or modem applications.
Summary of Contents for SoundExpression 14.4VSP
