69
Command
Description
Command Character Echo
ATE0
Disables echoing of the commands to the screen.
ATE1
Enables echoing of the commands to the screen. (default)
Switch Hook Control
ATH0
Instructs modem to go on-hook.
ATH1
Instructs modem to go off-hook.
Identification
ATI0
Reports product code
ATI1
Reports version number
ATI2
Verifies ROM checksum
ATI3
Reports Device set name
ATI4
Reports modem configuration
Speaker volume
ATL0
Off or low volume.
ATL1
Low volume.
ATL2
Medium volume. (default)
ATL3
High volume.
Speaker control
ATM0
Disables the modem speaker.
ATM1
Turns speaker on until carrier has been detected. (default)
ATM2
Instructs the modem speaker to stay on all of the time.
ATM3
Enables speaker after dialing until connection is established.
Select Data Rate Handshake
ATN0
When originating or answering, handshakes only at the DTE-to-Modem
data rate.
ATN1
When originating or answering, begin handshaking at the DTE-to-
Modem data rate. If the remote modem does not support the local
DTE-to-Modem data rate, drops down to the highest compatible rate.
Modem Command Reference
Summary of Contents for SoundExpression 14.4VSP
