BMW K 1200 S Rider'S Manual Download Page 79

Page: 79 / 163

Accessor

ies

Luggage system

Correct loading

Overloading and uneven
loading can diminish

the riding stability of your
motorcycle.
Do not exceed the permitted
total weight and permitted
wheel loads (

137). Observe

the following information on
loading.

• Adjust the settings for spring

preload (

47), damping

(

44, 46) and tire pressure

(

126) to the total weight.

• Ensure that the case vol-

umes on the left and right are
equal.

• Ensure that the weight is

equally distributed on the left
and right.

• Pack heavy items of luggage

downwards and inwards.

• Load the left-hand and right-

hand cases

with a maxi-

mum of 18 lbs (8 kg) each.

• Load the tank rucksack with

a maximum of 11 lbs (5 kg).

Release levers

There is a release lever on the
left and right of each case
lock.
The gray lever marked OPEN
is used to open and close the
cases.
The black lever marked
RELEASE is used to remove
and attach the cases.

Key positions

Cases locked and secured

• Lock in direction of travel.
» Cases locked.
» Cases secured.
» Key can be removed.

Summary of Contents for K 1200 S




































































































































































Search results

Summary of Contents for K 1200 S

Reviews:

Related manuals for K 1200 S

Brands by name

Popular brands

BMW K 1200 S, Rider'S Manual

Search results

Summary of Contents for K 1200 S

Reviews:

Related manuals for K 1200 S

Brands by name

Popular brands