BMW K 1200 S, Rider'S Manual

Page: 117 / 163

6
115
Ma
in
te
n
a
n
c
e
• Remove the battery ground
wire
2
first.
• Then remove the positive
battery cable
3
.
• Unfasten the screws
4
and
pull the retaining bracket
backwards.
• Lift the battery upwards; if it is
difficult to move, moving it
back and forth will help.
Installing battery
An overview of the types of
screw used and the corre-
sponding tightening torques can
be found on (
b
125). c
During the work described
in the following, a motor-
cycle that has been parked
incorrectly can fall over.
Make sure that the motorcycle is
securely parked.
c
• If necessary, turn the ignition
key to the "Ignition Off"
position.
• Place the battery in the battery
compartment, positive termi-
nal on the right in the direction
of travel.
• Push the retaining bracket
over the battery; tighten the
screws with the appropriate
tightening torque.
• Fit the positive battery cable
first; tighten with the appropri-
ate tightening torque.
• Then fit the negative battery
cable; tighten with the appro-
priate tightening torque.
• Fit the battery compartment
lid; tighten the screws with the
appropriate tightening torque.
• Switch on the ignition.
• Fully open the throttle once or
twice.
» The engine management
system records the throttle-
valve position.