BMW K 1200 S Rider'S Manual Download Page 32

Page: 32 / 163

Opera

Ignition key and
steering lock

Keys

You will receive one master
key and one spare key. If you
lose a key, read the informa-
tion on the electronic immobi-
lizer, EWS (

22).

Ignition key and steering
lock, tank filler cap lock

and seat lock are all operated
with the same key. System
cases

with locks for the

same key can be ordered on
request.

Switching on ignition

• Turn the key into position

» Parking light and all function

circuits switched on.

» Pre-ride check is

performed (

53).

» ABS self-diagnosis is

performed (

55).

» Engine can be started.

Switching off ignition

• Turn the key into position

» Light switched off.
» Steering lock unsecured.
» In this position, you can

remove the key.

Summary of Contents for K 1200 S




































































































































































Search results

Summary of Contents for K 1200 S

Reviews:

Related manuals for K 1200 S

Brands by name

Popular brands

BMW K 1200 S, Rider'S Manual

Search results

Summary of Contents for K 1200 S

Reviews:

Related manuals for K 1200 S

Brands by name

Popular brands