BMW K 1200 S Rider'S Manual Download Page 101

Page: 101 / 163

Without BMW Integral ABS
• Press the handbrake lever

firmly a number of times until
the resistance point is
noticeable.

With BMW Integral ABS:
• Switch on the ignition.
• Wait for the self-diagnosis

(

55).

• Press the handbrake lever

firmly a number of times until
the resistance point is
noticeable.

Brake pads that are not
aligned and positioned

relative to the brake discs may
lead to delays in the braking
effect.
Before beginning a journey,
check that the braking effect
kicks in without any delay.

Removing rear wheel

You will find an overview
of the types of screw

used on (

124).

Motorcycle without center
stand

To ensure a secure stance of
the motorcycle during the fol-
lowing work:
• Place the motorcycle on the

BMW Motorrad rear wheel
stand (

104).

• The rest of the procedure is

the same as for motorcycles
with a center stand.

Motorcycles with center
stands

• Placing the motorcycle

on the center stand

• Remove the bolt

of the

muffler cover

• Pull off the cover towards the

rear.

Summary of Contents for K 1200 S




































































































































































Search results

Summary of Contents for K 1200 S

Reviews:

Related manuals for K 1200 S

Brands by name

Popular brands

BMW K 1200 S, Rider'S Manual

Search results

Summary of Contents for K 1200 S

Reviews:

Related manuals for K 1200 S

Brands by name

Popular brands