BMW Motorrad R 1250 GS 2020, Rider'S Manual

Page: 86 / 294

80 OPERATION
Deactivate the tilt sensor
when transporting the ve-
hicle to avoid triggering the
DWA.
Arming tone
: Confirmation
alarm tone after activating/de-
activating the DWA in addition
to flashing turn indicators.
Arm automatically
: Auto-
matic activation of the alarm
function when turning off the
ignition.
TIRE PRESSURE CONTROL
(RDC)
with riding modes Pro OE
with tire pressure monitor
(TPM) OE
Switching setpoint pressure
warning on or off
If the minimum tire pressure
is reached, a target pressure
warning can be displayed.
Go to menu
Settings, Ve-
hicle settings, RDC
.
Switch
Target pressure
warn.
on or off.
HEATING
Operating heated grips
with heated grips OE
without seat heating OE
The heated grips option
can only be activated
when the engine is running.
The increase in power
consumption caused by
the heated grips can drain the
battery if you are riding at low
engine speeds. If the battery
is inadequately charged, the
heated grips are switched off
to ensure starting capability.
Starting the engine ( 124).
Press the button 1 repeat-
edly until the desired heating
level 2 is shown in front of
the heated grip icon 3 .
The handlebar grips can be
heated at two different levels.
Low heater output
High heater output
The high heating level is used
for fast heat-up of the grips;
then the switch should be
switched back to the 1st level.
If no further changes are
made, the selected heating
level is set.