BMW Motorrad R 1250 GS 2020, Rider'S Manual

Page: 72 / 294

66 OPERATION
To adjust the damping rate:
Repeatedly press button 1
briefly until the desired setting
is displayed.
The damping cannot be
adjusted while the motor-
cycle is being ridden.
The selection arrow 4 is dis-
played.
The selection arrow 4 goes
away after the changeover of
the status.
The following settings are avail-
able:
Road
: damping for comfort-
able road travel
Dynamic
: damping for
dynamic road travel
Enduro
: damping for off-
road riding. Only available
in the riding modes
ENDURO
or
ENDURO PRO
and cannot
be further adjusted in these
riding modes.
The following message is dis-
played if no adjustments are
possible in the selected rid-
ing mode:
In ENDURO rid-
ing mode damp. not ad-
justable.
Adjusting spring preload
To adjust the spring preload:
Starting the engine ( 124).
Repeatedly press and hold
button 1 until the desired set-
ting is displayed.
BMW Motorrad recom-
mends the
Auto
setting.
Min
can be used for easier dis-
mounting and
Max
, for exam-
ple, for off-road use.
The settings Min, Auto
and Max can only be se-
lected while stationary.
The following message is out-
put if no adjustments are pos-
sible:
Load adjust. only
avail. when halted.