Blunet BL-32960M, Installation & User Manual

Page: 61 / 224

61
<Attention>
1. If Alarm Pop-up Hold (sec) set to Off, Alarm Pop-up will not operate.
2. If Alarm Pop-up Hold (sec) set to Keep, it does not return to previous screen before press any button.
14.7.
Zoom Screen mode
- At single full screen mode, press [ZOOM] to monitor 2x image size.
- Default zoom screen locates to main center when press [ZOOM] button. Zoom image can shift
left-right in 18 steps and top-buttom in 12 steps.
- Use directonal key button to screen move
- Press [ZOOM] one more to return to original screen.
14.8. Pause Live screen
- Live screen can pause like PlayBack.
- Press [PAUSE] to pause live screen and press [
?
] to return live screen.
14.9.
PTZ Control
Connect PTZ controller to eDVR and set relevant protocol from “Serial Setup” menu, then PTZ can
operate while monitoring live images.
- Press [SELECT] button first.
- Channel select icon is on the screen,
- Shift to channel to control PTZ with directional key. (Press [SELECT] at single screen mode)
- Press [MENU] at channel selection icon displayed to view PTZ (Pan/Tilt, Zoom/Focus, Load
Preset, Save Preset).
- Select any wanted menu from them and press [ENTER].
14.9.1. Pan/Tilt Control
This menu is used to control Pan & Tilt function at real-time monitoring mode.
- Press [SELECT] button and select Channel.