Blunet BL-32960M, Installation & User Manual

Page: 58 / 224

58
14.4.
Manual Recording
By the press [REC] button for user recording, it records as long time as it set the time. It is prior to
Normal Rec, Event Rec. And it records by user recording set in disregard for any recording setup when
user recording starts.
14.5.
Auto Switch mode
There are System Standard modes and User Defined mode in Auto Switch mode. And Users Sequence
mode operates by the press [SEQ] button 1 sec longer.
<Attention>
System stardard mode is capable to use when channel division is more than the number camera
connected. Namely, single at 2 or more cameras, 4 division modes at more than 5 cameras should be
connected. 16 division mode does not support auto switch function.
14.5.1. System Standard mode
- By [SEQ] button, it can monitor auto switching of all channels.
- Press [MENU] for the setting switching term.
- Move to “Monitor” from OSD menu.
- Press [
?
] to move from “Monitor” to “Monitor 1”.
- Select “Seq. Switching(sec)” and set value from 1 sec. to 60 sec. At OFF set, auto switch mode
does not operate.