Blunet BL-32960M, Installation & User Manual

Page: 54 / 224

54
(5) Function buttons
COPY : Function to copy recorded images
In single monitoring mode, press the button to activate COPY menu
SEQ : Function to diplay all video connected sequentially
Press more than 1 sec. to operate User Sequnce mode
MULTI
: Function to monitor multi video images in a screen((4/9/16 division channel)
SELECT : Function to select video channel to control PTZ in Monitor model.
And function to select video channel to Copy/Backup/Delete in Playback mode.
ZOOM : Zoom video image at 1 channel mode
ACK : Cancel alarm output that is set to Latched
RELAY
: Relay On/Off in Monitoring mode and return to original status when alarm pop-up
MON : Function to select Monitor(1~4) to control
Press the button and monitor number to control relevant monitor
REC
: Function to start/stop recording by user
Start/Stop user recording according to set in advance
(6) Channel Select button
Select video channel when monitoring & playback
Below LED on each channel button indicates the following status
LIGHT : Indicates Monitoring
BLINK : indicates Alarming
(7) Menu & directional button
SEARCH
: Search the recorded image data at Playback mode
MENU : PTZ Control or Setup Menu function
HELP : Indicate each video data(Date, Channel name, HDD status etc.)
EXIT/LOCK
: Move upper menu at Setup or Screen Lock
PALY : Use as ENTER button during Menu operating, and use as PLAY button when
playback the recorded video data
Directonal
Key
: Playback function at Playback mode, or else to move direction indicate
REW : Each press of the button will increase reverse playback speed gradually
(x1, x2, x4, x8, x16, x32, x64)
FFW
: Each press of the button will increase playback speed gradually
(x1, x2, x4, x8, x16, x32, x64)
PAUSE : To pause Live/replaying