Blunet BL-32960M, Installation & User Manual

Page: 212 / 224

212
Replacing HDD
Checking HDD
eDVR file system (VFS2) sensors bad sector automatically, and the sensored bad sector is not used.
The following means when HDD is broken or has some problem in connection.
(1) When playback is stopped or eDVR is rebooted in specific playback range or image searching per
event is impossible.
(2) When recording is stopped and “Disk Manager” shows HDD type as [X].
When disk is broken
In case of not reading or writing a disk comes from physical error or occuring a bad sector at the
beginning of a disk, it is decided as a disk error.
In case of being other disk inside eDVR or able to storage a data, it is recorded at the next disk.
Simultaneously, it notifies bad disk marked as [X] to a user popping up eDVR disk manager.
Keeping Data
To keep the stored data by the fixed time or semi permanently, you should back up or reserve as HDD
itself.
Backup
(1) Connect backup HDD to IEEE1394 port.
(2) Go to playback mode with pressing the [Playback] button.
(3) Press the [SELECT] button and then [MENU] button.
(4) Run “Backup Manager” with selecting the “Backup Data” menu.