Blunet BL-32960M Installation & User Manual Download Page 144

Page: 144 / 224

144

It may not speed as fast as it selects according to network speed that connected to a system and line

speed connects remotely and performance of PC.

17.3.4.

Moving Playback

Move to Playback page by click the menu as above picture on top of page.

17.3.5.

Channel On/Off

It is On/Off button for the Channel located to left in page. Click the channel wanted to On or Off.

And Default is On.

Above picture refer to Off channel 1. In case of Channel Off, relevant button is projected. And video does

not come and changed to black screen.

<Note>

Disabled channel button refers to do not support and relate to this unit.

17.3.6.

Sensor Indication

The icon indicates when sensor occurs in system.

Summary of Contents for BL-32960M

































































































































































































































Search results

Summary of Contents for BL-32960M

Reviews:

Related manuals for BL-32960M

Brands by name

Popular brands

Blunet BL-32960M, Installation & User Manual

Search results

Summary of Contents for BL-32960M

Reviews:

Related manuals for BL-32960M

Brands by name

Popular brands