Blunet BL-32960M Installation & User Manual Download Page 107

Page: 107 / 224

107

<Alarm Recording ON>

(1)

After complete setup at Alarm Rec. menu, set Alarm recording ON to operate alarm recording.

(2)

Move to Schedule Rec.> Global menu.

(3)

Select Full time.

(4)

Press [Enter] at Alarm Recording and set to ON.

(5)

Press Apply, and press [Exit] to exit from menu.

<MD, Sensor Setup>

After complete Alarm Recording setup, set MD, Sensor. For the detail of MD, Sensor setup, refer to

“5.1.5.1 Alarm Source Setup”.

Now it is alarm recording when MD, Sensor alarm occurs.

16.1.5.4.2.

Alarm Recording Setup by Camera Schedule

Above “Alarm Recoirding Setup using MD, Sensor” set to all cameras in same condition to record alarm

recording by schedule. Now let’s set other cameras with other schedule to do alarm recording.

In case of Alarm recording, it can ON/OFF at each menu by schedule in Schedule Rec. it can ON to the

Summary of Contents for BL-32960M

































































































































































































































Search results

Summary of Contents for BL-32960M

Reviews:

Related manuals for BL-32960M

Brands by name

Popular brands

Blunet BL-32960M, Installation & User Manual

Search results

Summary of Contents for BL-32960M

Reviews:

Related manuals for BL-32960M

Brands by name

Popular brands